To draw low and high carbon steel wire .      
All machines will be supplied with Motor, Starter panel , control station , foot switch.       
Water cooling of drum and mould box     
Type : 1W1-4/600       
Motor each block : 11KW x 4=44KW     
Gear Box : Oil Filled        
Capacity : 10MT/24 hrs      
Drum dia: 600mm ( hardened drum)     
Inlet wire: 6mm       
Outlet wire : 2.5mm       
Wire take off roll/drum with crane     
Vertical coil of 2MT loaded with wire coil and reeling to feed 4 block machine  
Accessories included as below       
Number of Moulds supplied - 7 nos included    
Wire drawing dies various types      
Wire drawing powder       
Other Accessories included as below-     
Spot weld machine, 10KVA                 6mm-2.5mm    
Wire Pointing machine for 6mm to 2.5mm,  3KW    
Fine Wire water tank drawing machine of 9 moulds     
To draw low and high carbon steel wire .      
All machines will be supplied with Motor, Starter panel , control station , foot switch.    
Water cooling of drum and mould box  
Type : LT-9/350       
Motors 11KW for machine+3.2 for vertical coiler =13.2KW   
Vertical coiling machine after -wire drawing block     
Gear Box : Oil Filled        
Capacity : 1.5MT/24 hrs       
Drum dia: 600mm ( hardened drum)     
Inlet wire: 2.5mm       
Outlet wire : 0.7mm       
Number of Moulds supplied - 7 nos     
Wire take off system and crane         it is a whole with 4 blocks   
Accessories included as below      
Wire drawing dies various types      
Accessories included as below-      
Spot weld machine, 10KVA               2.5mm-1.3mm    
Wire Pointing machine for 6mm to 2.5mm, 3KW